Acura TL Parts | Complete Car Parts

Showing 2 of 2 pages. About 95 results

Sort:

Show:

Air System, Springs and Components Shocks and Struts Alignment Links, Joints & Control Arms

Image

Brand

Part #

Product

Shipping

Price

Part #: 15100

Rear Quick Complete Strut & Coil Spring Assembly 1999-2003 Acura TL FWD V6 3.2L

0 out of 5 stars

0 total ratings

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts. No spring compressor required!
Each strut is designed to ensure direct fit in factory mounting positions and proper alignment. (alignment required after installation)
Preassembled Suspension Strut assembly including Top mount, bearing plate (where applicable), bumper, insulators and coil spring
Warranty: 1 Year against manufacturing defects - free return shipping covered
Advised to Replace Both Sides for Best Results

Part #: SM5578

Rear Upper Coil Spring Insulator for Acura CL TL TSX Honda Accord Accord Crosstour Crosstour - KYB SM5578

0 out of 5 stars

0 total ratings

Part #: TA2112

Inner Steering Tie Rod End for Acura CL TL Honda Accord - Delphi TA2112

0 out of 5 stars

0 total ratings

Delphi sway bar links are fatigue tested to avoid failure
Sway bar links manufactured with ultrasonic molding to help prevent future weld breakage
Delphi machines to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: RK620044

Front Right Lower Suspension Control Arm for Acura CL TL Honda Accord FWD - Moog RK620044

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: TC1211

Front Right Suspension Stabilizer Bar Link for Acura CL TL Honda Accord - Delphi TC1211

0 out of 5 stars

0 total ratings

Delphi sway bar links are fatigue tested to avoid failure

Part #: TD1666W

Rear Suspension Stabilizer Bar Bushing Kit for Acura CL TL Honda CR-V - Delphi TD1666W

0 out of 5 stars

0 total ratings

Meets or Exceeds Original Equipment Manufacture Specifications

Part #: 520-659

Suspension Control Arm and Ball Joint Assembly for Acura CL TL Honda Accord - 520-659 Dorman

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Check Below for Application Notes

Part #: TA1589

Left Outer Steering Tie Rod End for Acura CL TL Honda Accord Isuzu Oasis - Delphi TA1589

0 out of 5 stars

0 total ratings

Delphi sway bar links are fatigue tested to avoid failure
Sway bar links manufactured with ultrasonic molding to help prevent future weld breakage
Delphi machines to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: TC2083

Front Left Upper Control Arm & Ball Joint for Acura CL TL Honda Accord - Delphi TC2083

0 out of 5 stars

0 total ratings

Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
Control arms utilize robot welding for consistent performance and quality
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: 741049

Front Suspension Strut for Acura CL TL Honda Accord FWD - 741049 KYB

0 out of 5 stars

0 total ratings

TRIPLE LIP FLUID SEAL TO REDUCE THE CHANCE OF OIL AND GAS LEAKING OUT
VEHICLE SPECIFIC, HAND ASSEMBLED, IN-HOUSE DAMPING VALVES CORRECTLY MANAGE TIRE CONTACT
KYB HAS THE STRONGEST AND THICKEST STRUT BODIES AND BRACKETS IN THE INDUSTRY; MINIMIZING FLEX TO MAINTAIN CORRECT ALIGNMENT IN ALL CONDITIONS

Part #: TA1588

Right Outer Steering Tie Rod End for Acura CL TL Honda Accord Isuzu Oasis - Delphi TA1588

0 out of 5 stars

0 total ratings

Delphi sway bar links are fatigue tested to avoid failure
Sway bar links manufactured with ultrasonic molding to help prevent future weld breakage
Delphi machines to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: 2-15100-001

Rear Pair Complete Strut and Coil Spring Assemblies for 1999-2003 Acura TL V6 3.2L

0 out of 5 stars

0 total ratings

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts. No spring compressor required!
Each strut is designed to ensure direct fit in factory mounting positions and proper alignment.
Preassembled Suspension Strut assembly including Top mount, bearing plate (where applicable), bumper, insulators and coil spring.
Warranty: 1 Year against manufacturing defects - free return shipping covered

Part #: 741050

Rear Suspension Strut for Acura CL TL Honda Accord FWD - 741050 KYB

0 out of 5 stars

0 total ratings

TRIPLE LIP FLUID SEAL TO REDUCE THE CHANCE OF OIL AND GAS LEAKING OUT
VEHICLE SPECIFIC, HAND ASSEMBLED, IN-HOUSE DAMPING VALVES CORRECTLY MANAGE TIRE CONTACT
KYB HAS THE STRONGEST AND THICKEST STRUT BODIES AND BRACKETS IN THE INDUSTRY; MINIMIZING FLEX TO MAINTAIN CORRECT ALIGNMENT IN ALL CONDITIONS

Part #: RK620045

Front Left Lower Suspension Control Arm for Acura CL TL Honda Accord FWD - Moog RK620045

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: TC6737

Rear Upper Control Arm & Ball Joint for Acura CL RL TL Honda Accord - Delphi TC6737

0 out of 5 stars

0 total ratings

Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
Control arms utilize robot welding for consistent performance and quality
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: TC7720

Rear Upper Rearward Suspension Control Arm for Acura CL TL Honda Accord - Delphi TC7720

0 out of 5 stars

0 total ratings

Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
Control arms utilize robot welding for consistent performance and quality
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: TC7868

Rear Upper Control Arm & Ball Joint for Acura CL TL Honda Accord - Delphi TC7868

0 out of 5 stars

0 total ratings

Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
Control arms utilize robot welding for consistent performance and quality
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: TD5115W

Front Lower Inner Suspension Control Arm Bushing for Acura CL TL Honda Accord Odyssey Prelude Isuzu Oasis - Delphi TD5115W

0 out of 5 stars

0 total ratings

Meets or Exceeds Original Equipment Manufacture Specifications

Part #: TC7736

Front Right Lower Suspension Control Arm for Acura CL TL Honda Accord - Delphi TC7736

0 out of 5 stars

0 total ratings

Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
Control arms utilize robot welding for consistent performance and quality
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: TC7737

Front Left Lower Suspension Control Arm for Acura CL TL Honda Accord - Delphi TC7737

0 out of 5 stars

0 total ratings

Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
Control arms utilize robot welding for consistent performance and quality
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: 11951

Front Left Quick Complete Strut & Coil Spring Assembly 1999-2003 Acura TL FWD V6 3.2L

0 out of 5 stars

0 total ratings

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts. No spring compressor required!
Each strut is designed to ensure direct fit in factory mounting positions and proper alignment. (alignment required after installation)
Preassembled Suspension Strut assembly including Top mount, bearing plate (where applicable), bumper, insulators and coil spring
Warranty: 1 Year against manufacturing defects - free return shipping covered
Advised to Replace Both Sides for Best Results

Part #: 11952

Front Right Quick Complete Strut & Coil Spring Assembly 1999-2003 Acura TL FWD V6 3.2L

0 out of 5 stars

0 total ratings

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts. No spring compressor required!
Each strut is designed to ensure direct fit in factory mounting positions and proper alignment. (alignment required after installation)
Preassembled Suspension Strut assembly including Top mount, bearing plate (where applicable), bumper, insulators and coil spring
Warranty: 1 Year against manufacturing defects - free return shipping covered
Advised to Replace Both Sides for Best Results

Part #: 2-11951-11952-001

Front Pair Complete Strut and Coil Spring Assemblies for 1999-2003 Acura TL V6 3.2L

0 out of 5 stars

0 total ratings

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts. No spring compressor required!
Each strut is designed to ensure direct fit in factory mounting positions and proper alignment.
Preassembled Suspension Strut assembly including Top mount, bearing plate (where applicable), bumper, insulators and coil spring.
Warranty: 1 Year against manufacturing defects - free return shipping covered

Part #: 4-11951-15100-001

Front & Rear Complete Strut & Coil Spring Assemblies for 1999-2003 Acura TL FWD

0 out of 5 stars

0 total ratings

• This Kit Comes with 4 Pre-assembled Complete Strut & Coil Spring Assemblies
• Loaded strut & spring assemblies allow for a quicker, safer install than bare struts. No spring compressor required!
• Each strut is designed to ensure direct fit in factory mounting positions and proper alignment.
• Warranty: 1 Year against manufacturing defects

Part #: 539-012

Front Upper Alignment Caster Camber Ball Joint for Acura CL TL TSX Honda Accord Civic CRX Odyssey - Dorman 539-012

0 out of 5 stars

0 total ratings

Meets Or Exceeds OEM Specs
Factory OEM Fit Form And Function
See Chart Below for important vehicle fitment details

Part #: 526-399

Front Left Upper Suspension Control Arm and Ball Joint Assembly for Acura CL TL Honda Accord - 526-399 Dorman

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Includes pre-installed ball joint and bushings
Manufactured for safety and reliability

Part #: 522-544

Rear Right Suspension Trailing Arm for Acura CL TL Honda Accord - 522-544 Dorman

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Check Below for Application Notes

Part #: 522-543

Rear Left Suspension Trailing Arm for Acura CL TL Honda Accord - 522-543 Dorman

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Check Below for Application Notes

Part #: 522-377

Suspension Control Arm for Acura CL TL Honda Accord - 522-377 Dorman

0 out of 5 stars

0 total ratings

Direct replacement to the original assembly on specific vehicle applications
Check Below for Application Notes

Part #: SM5577

Front Upper Coil Spring Insulator for Acura CL TL Honda Accord - KYB SM5577

0 out of 5 stars

0 total ratings

Part #: SM5713

Rear Lower Coil Spring Insulator for Acura CL TL Honda Accord - KYB SM5713

0 out of 5 stars

0 total ratings

Part #: K100330

Front Upper Suspension Ball Joint for Acura CL TL TSX Honda Accord Civic CRX Odyssey Isuzu Oasis - MOOG K100330

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: K160216

Rear Suspension Strut Mount for Acura CL TL TSX Honda Accord Accord Crosstour Crosstour - MOOG K160216

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: K202006

Front Upper Suspension Control Arm Bushing for Acura CL TL Honda Accord - MOOG K202006

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: K90211

Alignment Caster Camber Shim for Acura CL TL Vigor Honda Accord Odyssey - MOOG K90211

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: K9492

Suspension Strut Mount Kit for Acura Honda Isuzu Mazda - MOOG K9492

0 out of 5 stars

0 total ratings

Engineered to meet or exceed OE standards

Part #: RK620375

Rear Upper Suspension Control Arm and Ball Joint Assembly for Acura CL TL Honda Accord FWD - Moog RK620375

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: RK641771

Rear Upper Rearward Suspension Control Arm for Acura CL TL Honda Accord FWD - Moog RK641771

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: RK641885

Rear Lower Suspension Control Arm for Acura TL Honda Accord FWD - Moog RK641885

0 out of 5 stars

0 total ratings

QUIET OPERATION -- Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG engineering designed, validated and life-cycle tested proven design
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
INSTALLATION READY -- Preinstalled ball joints with sealed sockets for maintenance-free operation "when applicable"
STRONG AND DURABLE -- Engineered to match or exceed OE requirements
RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Exclusive cover plate protects against contaminants leaking into the bearing surface
ADDED CORROSION PROTECTION -- E-coated steel control arms inhibit premature deterioration

Part #: TC5678

Suspension Trailing Arm for Acura CL TL Honda Accord - Delphi TC5678

0 out of 5 stars

0 total ratings

Delphi sway bar links are fatigue tested to avoid failure
Sway bar links manufactured with ultrasonic molding to help prevent future weld breakage
Delphi machines to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: TC5939

Rear Lower Forward Suspension Control Arm for Acura CL TL Honda Accord - Delphi TC5939

0 out of 5 stars

0 total ratings

Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
Control arms utilize robot welding for consistent performance and quality
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: TC6735

Rear Lower Suspension Control Arm for Acura TL Honda Accord - Delphi TC6735

0 out of 5 stars

0 total ratings

Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
Control arms utilize robot welding for consistent performance and quality
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Part #: TD4286W

Rear Lower Suspension Control Arm Bushing for Acura CL Integra TL Honda Accord Civic Civic del Sol CRX - Delphi TD4286W

0 out of 5 stars

0 total ratings

Meets or Exceeds Original Equipment Manufacture Specifications

Part #: TD4288W

Front Suspension Stabilizer Bar Bushing Kit for Acura CL TL Honda Accord - Delphi TD4288W

0 out of 5 stars

0 total ratings

Meets or Exceeds Original Equipment Manufacture Specifications

Part #: TD4604W

Suspension Strut Rod Bushing Kit for Acura CL TL Vigor Honda Accord Odyssey Prelude Isuzu Oasis - Delphi TD4604W

0 out of 5 stars

0 total ratings

Meets or Exceeds Original Equipment Manufacture Specifications

Suspension

Filters

$79.59

$26.64

$37.04

$96.60

$32.74

$22.36

$56.27

$36.08

$88.65

$167.89

$36.08

$144.90

$153.73

$96.75

$128.55

$42.25

$53.10

$32.43

$92.89

$112.05

$78.18

$78.18

$142.82

$275.07

$108.59

$148.16

$58.82

$58.82

$47.68

$24.87

$24.32

$114.38

$53.21

$26.28

$43.65

$33.85

$55.76

$51.40

$98.74

$42.52

$55.45

$116.62

$29.87

$22.16

$40.41

Shopping Cart: 0 Items

Total: $0.00

Your Wishlist: 0 Items

Total: $0.00